Välk võib olla ohtlik ja hävitav loodusjõud. Piksekaitsesüsteemide kasutamine hoonete, kõrgete puude ja muude ehitiste kaitsmiseks on ülioluline. Piksekaitsesüsteemi põhikomponent on piksevarras. Seade on loodud välgulöökide pealtkuulamiseks ja laengu ohutult maapinnale juhtimiseks. Selles blogis uurime piksevarrass, nende eesmärk ja tööpõhimõte. Piksevardad come in many different shapes and sizes, including hollow, solid, pointed, round, flat, and even furry. However, the most important feature of the piksevarras is that it is made of conductive materials such as copper and aluminum. Copper and its alloys are the most commonly used lightning protection materials. TRSB series piksevarrass are used to protect buildings, tall trees and other objects from lightning strikes. When installing a piksevarras, it is very important to ensure that it is grounded and complies with IEC/GB standards. Each type of piksevarras has different high standard specifications. The function of the piksevarras is to prevent the piksevarras of the exciter and the reflector in advance, and at the same time to ensure the insulation of the collector. The tips of the actuators and reflectors have special structures that allow the actuators to absorb and store energy from the electric field. The reflector is well connected to ground and has the same potential. Exciters and reflectors have a certain electromagnetic field strength. Before a lightning strike occurs, the piksevarras will accumulate heterogeneous charges due to electrostatic induction. As a result, the electric field strength suddenly increases the excitation voltage between the reflectors, and the tip sparks break down the surrounding air. This ionized air makes the piksevarras a central collection of piksevarrass in a very short time and releases the energizer. Due to its special structure, the piksevarras produces a faster upward discharge channel than ordinary piksevarrass. When installing piksevarrass, it is important to follow some precautions. The piksevarras should be installed at the highest point of the building to ensure that it intercepts lightning strikes. It should also be installed by a qualified professional trained in lightning protection systems. Misusing piksevarrass can be dangerous and ineffective, so guidelines should be followed. In conclusion, lightning protection systems are essential to safely intercept lightning strikes and prevent damage or injury. Piksevardad are a key component of these systems, designed to intercept lightning strikes and conduct the charge safely to ground. They come in many different shapes and sizes, but all serve the same purpose - to protect structures from dangerous forces of nature. By following proper installation methods and precautions, piksevarrass can provide the peace of mind you need during severe weather.

---

Postitamise aeg: May-05-2023